Mascus Blog újdonságok.
Hirdetések száma: 201

Használt Caterpillar 415

Itt megtalálja az összes használt Caterpillar 415, 415 F 2 kotrórakodók hirdetést. Lépjen kapcsolatba a használt Caterpillar 415, 415 F 2 kotrórakodók kereskedőjével. Részletes adatokért, klikkeljen a fényképre, megjelenik a gép termékkártyája és az eladó adatai.
Olvasson többet itt Bezár
Keresés
hirdetés/oldal
Oldal
E-mail értesítő
Caterpillar 415 specs

  • Caterpillar 415F2 IL (2015)

    Specifications
    Engine
    207 cu in
    3.9 in
    4.33 in
    Engine meets U.S. EPA Tier 4 Final emission standards.
    68 hp
    74 hp
    Cat C3.4B
    74 hp
    No derating required up to 2286 m (7,500 ft).
    68 hp
    68 hp
    72 hp
    73 hp
    73 hp
    69 hp
    307 lb ft
    88 %
    Steering
    Front Wheel
    Hydrostatic
    2.6 in
    4.7 in
    1.4 in
    11 degrees
    26.8 ft in
    36 ft in
    Transmission
    3.4 mph
    5.5 mph
    13 mph
    23 mph
    3.4 mph
    5.5 mph
    13 mph
    23 mph
    Weights
    17637 lb
    359 lb
    14035 lb
    101 lb
    17637 lb
    Tires
    Front: 12.5 80/16.9; Rear: 16.9-24
    Weights
    530 lb
    1015 lb
    198 lb
    2018 lb
    3622 lb
    255 lb
    Hydraulic System
    Variable Flow, Axial Piston
    Closed Center
    33 gal/min
    2973 psi
    2973 psi
    Service Refill Capacities
    42 gal
    10.6 gal
    Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur
    23.8 gal
    4.4 gal
    2.3 gal
    4 gal
    0.4 gal
    2.9 gal
    0.2 gal
    4 gal
    4.4 gal
    Axle Ratings
    50582 lb
    50582 lb
    20233 lb
    20233 lb
    Counterweights - Front - Minimum Recommendations
    255 lb
    no counterweight
    Loader Bucket
    3 in

  • Caterpillar 415F2 (2014)

    Dimentions
    Backhoe
    17.9 ft in
    14.3 ft in
    Specifications
    Engine
    207 cu in
    3.9 in
    4.33 in
    68 hp
    74 hp
    Cat C3.4B
    68 hp
    74 hp
    Engine meets U.S. EPA Tier 4 Final emission standards.
    68 hp
    88 lb ft
    68 hp
    68 hp
    72 hp
    73 hp
    73 hp
    69 hp
    307 lb ft
    Steering
    Front Wheel
    Hydrostatic
    2.6 in
    4.7 in
    1.4 in
    11 degrees
    26.8 ft in
    36 ft in
    Transmission
    3.4 mph
    5.5 mph
    12 mph
    23 mph
    3.4 mph
    5.5 mph
    12 mph
    23 mph
    Weights
    24251 lb
    359 lb
    255 lb
    530 lb
    1015 lb
    15207 lb
    101 lb
    392 lb
    Tires
    Front: 340-80R18 143B R-4; Rear: 500/70R24 157B, R-4
    Front: 11L-16 (12 ply) F-3; Rear: 19.5L-24 (12 ply) R4 ATU
    Front: 12.5/80-18-1810 PR I-3; Rear: 19.5L-24 12 PR R4
    Front: 12-16.5 (10 ply); Rear: 19.5L-24 (12 ply) ATU
    Front: 12-16.5 (12 ply); Rear: 19.5L-24 (12 ply) ATU, 20 PITCH
    Weights
    24251 lb
    659 lb
    1642 lb
    Tires
    Front: 340-80R18 143B R-4; Rear: 19.5L-24, 12, ATU
    Front: 340/80R18 XMCL 142A8; Rear: 500.70R24 XMCL 157A8
    Hydraulic System
    Variable Flow, Axial Piston
    Closed Center
    35 gal/min
    3336 psi
    3336 psi
    Brakes
    Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
    Self-adjusting, completely enclosed and sealed.
    Foot operated brake pedals can be interlocked for roading.
    Parking/secondary brakes are independent of the service brake system.
    Parking brake is mechanically applied through an adjustable hand lever located on the right console.
    Service Refill Capacities
    42 gal
    10.6 gal
    Requires ultra-low sulfur fuel less than or equal to 15 ppm fuel sulfur.
    23.8 gal
    4.4 gal
    2.3 gal
    4 gal
    0.4 gal
    2.9 gal
    0.2 gal
    4 gal
    5.8 gal
    Standards
    SAE J/ISO 3449 APR98 LEVEL II and ISO 3449: 1992 LEVEL II
    SAE J1040 MAY94; ISO 3741 1994
    SAE J/ISO 3450; ISO 3450 1996
    ANSI/SAE J1166 OCT98 is 79 dB(A)
    SAE J188 JUN86 is 76 dB(A)
    Axle Ratings
    50582 lb
    50582 lb
    50582 lb
    20233 lb
    20233 lb
    20233 lb
    Engine Features
    Regeneration is passive and does not require any input from the operator or disrupt work.
    Three-ring pistons made of lightweight, silicon/aluminum alloy for strength and maximum thermal conductivity.
    Forged chrome/molybdenum-steel crankshaft with salt bath nitrocarburized pins and journals.
    Front and rear crankshaft oil seals are lip type Viton and PTFE designs featuring an integral dust lip.
    For durability, inlet valves are nitrided, martensitic chrome silicon steel.
    For durability, exhaust valves are nitrided, austenitic chrome manganese-nickel steel.
    Cylinder block is high strength, cast iron alloy of deep skirt, monobloc design for increased strength and long life.
    Cylinder head is high strength, cast iron alloy construction with extra duty wall and deck thickness.
    Cylinder head's intake and exhaust ports are precision cast to promote optimum gas flow.
    Direct injection fuel system provides accurate fuel delivery and efficiency.
    Dry-type axial seal air cleaner with integral precleaner, automatic dust ejection system, and filter condition indicator.
    Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
    Standard glow plug starting aid system for efficient cold weather starting.
    High contact ratio/gear train, peripheral fixed isolation top cover and open deck block design reduce bare engine noise.
    Higher low end torque for better engine/machine performance.
    Engine is equipped with electric fuel priming pump.