Mascus Blog újdonságok.
Hirdetések száma: 24

Használt Caterpillar 72

Itt megtalálja az összes használt Caterpillar 72, 72 H tartozékok hirdetést. Lépjen kapcsolatba a használt Caterpillar 72, 72 H tartozékok kereskedőjével. Részletes adatokért, klikkeljen a fényképre, megjelenik a gép termékkártyája és az eladó adatai.
Kérjük látogassa hasonlóképp a Caterpillar tartozékok oldalt a Mascus Márkák listájában.
Olvasson többet itt Bezár
Keresés
hirdetés/oldal
Oldal
E-mail értesítő
Caterpillar 72 specs

  • Caterpillar 7295 (2012)

    Dimentions
    Dimensions
    100000 lb
    Specifications
    Electrical
    6,000V, 6,600V, 7,200V
    2886 HP
    3 phase, 50/60 Hz, 7,200V
    IGBT Acutrol drive system.
    538-753 kW (721-1,010 hp)
    Other voltages available to suit customer requirements.
    4,160V, 7,200V
    Weights
    These weights will vary slightly depending upon dipper and optional equipment selection.
    All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
    1748837 lb
    352000 lb
    Front End
    One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
    Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
    High impact ropes available as an option
    2.375 in
    2
    1
    2.25 in
    0.625 in
    1
    4
    2.25 in
    2.75 in
    1
    Lube System
    Automatic, single-line system for open gear lubricant and grease.
    6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
    External fast fill from lower level.
    Main Structures
    Dual-motor independent drive.
    Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
    A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
    41.33 in
    Ground bearing pressure is dependent upon many factors.
    28.22 in
    315.6 ft2
    39 in
    Optimal Working Ranges*
    Optimal working ranges based on loading a Cat 785D truck.
    *All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
    27.56 ft in
    45 ft in
    67.59 ft in
    48.88 ft in
    2.1325 ft in

  • Caterpillar 725C2 (2016)

    Dimentions
    Dump
    58422.43 lb
    Specifications
    Engine
    567 cu in
    4.53 in
    5.87 in
    The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
    314 hp
    320 hp
    Cat C9.3 ACERT
    316 hp
    The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
    The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
    Net power when the fan is at maximum speed is 214 kW (287 hp) per the SAE reference conditions.
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
    1275 lb ft
    1200 rpm
    Cat C9.3 ACERT
    1262 lb ft
    7500 ft in
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    29 mph
    36 mph
    6 mph
    Steering
    4.75 seconds @ 60 rpm
    Service Refill Capacities
    21.9 gal
    108.8 gal
    5.3 gal
    10 gal
    12.4 gal
    29.1 gal
    33 gal
    6.3 gal
    Standards
    ISO 3449 Level II 2005
    ISO 3471 2008
    ISO 3450 2011
    ISO 5010 2007
    Operating Weights
    31835 lb
    9755 lb
    9205 lb
    50795 lb
    5512 lb
    23700 lb
    23700 lb
    52912 lb
    37374 lb
    33455 lb
    32905 lb
    103707 lb
    Sound Levels
    76 dB(A)
    The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
    Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    Turning Circle
    Dimensions are for machines equipped with 23.5R25 tires.
    294 in
    318 in
    153 in
    210 in
    Body Capacities
    19.6 yd3
    14.4 yd3
    14.5 yd3
    20.4 yd3
    Body Hoist
    10 s
    8 s
    Body Plate
    High strength Brinell HB450 wear resistant steel

  • Caterpillar 725C2 Bare Chassis

    Dimentions
    Dump
    57320.12 lb
    Specifications
    Engine
    762.8 cu in
    5.1 in
    6.2 in
    314 hp
    320 hp
    Cat C13 ACERT
    316 hp
    7500 ft in
    1275 lb ft
    1262 lb ft
    1200 rpm
    Cat C9.3 ACERT
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    29 mph
    36 mph
    6 mph
    Steering
    4.75 seconds @ 60 rpm
    Service Refill Capacities
    21.9 gal
    108.8 gal
    10 gal
    12.4 gal
    29.1 gal
    33 gal
    6.3 gal
    5.2 gal
    Standards
    ISO 3449 Level II - 2005
    ISO 3471 - 2008
    ISO 3450 - 2011
    ISO 5010 - 2007
    Sound Levels
    76 dB(A)
    Turning Circle
    Dimensions are for machines equipped with 23.5R25 tires.
    45 degrees
    294 in
    318 in
    153 in
    210 in
    Wheel Base Length
    156.7 in
    215.2 in

  • Caterpillar 725C (Tier 4, Stage IV) (2013)

    Dimentions
    Dump
    57320.12 lb
    Specifications
    Engine
    567 cu in
    4.53 in
    5.87 in
    314 hp
    320 hp
    Cat C9.3 ACERT
    316 hp
    8400 ft in
    1275 lb ft
    1263 lb ft
    1200 rpm
    Cat C9.3 ACERT
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    30 mph
    35 mph
    6 mph
    Steering
    4.75 seconds @ 60 rpm
    Service Refill Capacities
    21.9 gal
    108.8 gal
    10 gal
    12.4 gal
    29.1 gal
    35.7 gal
    6.3 gal
    5.3 gal
    Standards
    ISO 3449 Level II - 2005
    ISO 3471 - 2008
    ISO 3450 - 2011
    ISO 5010 - 2007
    Operating Weights
    31813 lb
    10030 lb
    9348 lb
    51191 lb
    5423 lb
    23303 lb
    23303 lb
    52029 lb
    37236 lb
    33333 lb
    32651 lb
    103220 lb
    Sound Levels
    76 dB(A)
    Turning Circle
    Dimensions are for machines equipped with 23.5R25 tires.
    45 degrees
    294 in
    318 in
    153 in
    210 in
    Body Capacities
    19.6 yd3
    14.4 yd3
    14.5 yd3
    20.4 yd3
    Body Hoist
    10 s
    8 s
    Body Plate
    High Strength Brinell HB450 Wear Resistant Steel

  • Caterpillar 72H

    Dimentions
    Boom
    90000 lb
    Dimensions
    18.1824 ft in
    22.5853 ft in
    1.4239 ft in
    Specifications
    Engine
    2236
    C9.3 ACERT
    205.1764 hp
    229 hp
    567.521 cu in
    4.5276 in
    5.8661 in
    Operational
    64390 lb