Mascus Blog újdonságok.
Hirdetések száma: 361

Használt Caterpillar 730

Itt megtalálja az összes használt Caterpillar 730 dömperek hirdetést. Lépjen kapcsolatba a használt Caterpillar 730 dömperek kereskedőjével. Részletes adatokért, klikkeljen a fényképre, megjelenik a gép termékkártyája és az eladó adatai.
Kérjük látogassa hasonlóképp a Caterpillar dömperek oldalt a Mascus Márkák listájában.
Olvasson többet itt Bezár
Keresés
hirdetés/oldal
Oldal
E-mail értesítő
Caterpillar 730 specs

  • Caterpillar 730C2 Bare Chassis

    Dimentions
    Dump
    68343.22 lb
    Specifications
    Engine
    763 cu in
    5.12 in
    6.18 in
    367 hp
    375 hp
    Cat C13
    370 hp
    12500 ft in
    1579 lb ft
    1564 lb ft
    1200 rpm
    Cat C13 ACERT
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    29 mph
    34 mph
    6 mph
    Steering
    4.75 seconds @ 60 rpm
    Service Refill Capacities
    21.9 gal
    108.8 gal
    10.5 gal
    9.2 gal
    29.1 gal
    35.7 gal
    6.3 gal
    5.3 gal
    Standards
    ISO 3449 Level II - 2005
    ISO 3471 - 2008
    ISO 3450 - 2011
    ISO 5010 - 2007
    Sound Levels
    76 dB(A)
    Turning Circle
    Dimensions are for machines equipped with 23.5R25 tires.
    45 degrees
    294 in
    318 in
    153 in
    210 in
    Wheel Base Length
    156.7 in
    215.2 in

  • Caterpillar 730C2 (2016)

    Dimentions
    Dump
    68343.22 lb
    Specifications
    Engine
    762.8 cu in
    5.1 in
    6.2 in
    The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
    367 hp
    375 hp
    Cat C13 ACERT
    370 hp
    The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
    The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
    Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
    1579 lb ft
    1200 rpm
    Cat C13 ACERT
    1564 lb ft
    12500 ft in
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    29 mph
    34 mph
    6 mph
    Steering
    4.75 seconds @ 60 rpm
    Service Refill Capacities
    21.9 gal
    108.8 gal
    5.2 gal
    10 gal
    12.4 gal
    29.1 gal
    33 gal
    6.3 gal
    Standards
    ISO 3449 Level II 2005
    ISO 3471 2008
    ISO 3450 2011
    ISO 5010 2007
    Operating Weights
    32882 lb
    9987 lb
    9436 lb
    52305 lb
    7231 lb
    27249 lb
    27249 lb
    61729 lb
    40113 lb
    37236 lb
    36685 lb
    114034 lb
    Sound Levels
    76 dB(A)
    The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
    Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    Turning Circle
    Dimensions are for machines equipped with 23.5R25 tires.
    294 in
    318 in
    153 in
    210 in
    Body Capacities
    23 yd3
    17.4 yd3
    18.2 yd3
    24.6 yd3
    Body Hoist
    12 s
    8 s
    Body Plate Thickness
    0.28 in
    0.43 in
    0.51 in
    0.51 in
    Body Plate
    High strength Brinell HB450 wear resistant steel

  • Caterpillar 730C2 EJ (2016)

    Dimentions
    Dump
    68343.22 lb
    Specifications
    Engine
    762.8 cu in
    5.1 in
    6.2 in
    The 730C2 EJ meets Tier 4 Final/Stage IV emission standards.
    367 hp
    375 hp
    Cat C13 ACERT
    370 hp
    The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), as well as Korea Tier 4.
    The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
    The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
    Net power when the fan is at maximum speed is 254 kW (341 hp) per the SAE reference conditions.
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
    1579 lb ft
    1200 rpm
    Cat C13 ACERT
    1564 lb ft
    12500 ft in
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    29 mph
    34 mph
    6 mph
    Steering
    4.75 seconds @ 60 rpm
    Service Refill Capacities
    21.9 gal
    108.8 gal
    5.2 gal
    10 gal
    12.4 gal
    29.1 gal
    33 gal
    6.3 gal
    Standards
    ISO 3449 Level II 2005
    ISO 3471 2008
    ISO 3450 2011
    ISO 5010 2007
    Operating Weights
    34535 lb
    12103 lb
    11552 lb
    58190 lb
    7231 lb
    27249 lb
    27249 lb
    61729 lb
    36013 lb
    42362 lb
    41811 lb
    120186 lb
    Sound Levels
    76 dB(A)
    The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
    Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    Turning Circle
    Dimensions are for machines equipped with 750/65 tires.
    294 in
    318 in
    153 in
    210 in
    Body Capacities
    22.1 yd3
    17.7 yd3
    Body Plate
    High strength Brinell HB450 wear resistant steel
    Body Eject
    12 s
    15 s

  • Caterpillar 730 Ejector (2009)

    Dimentions
    Dump
    31 lb
    Specifications
    Engine
    680 cu in
    5.1 in
    5.5 in
    321 hp
    319 hp
    325 hp
    Cat C11 ACERT
    321 hp
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    29 mph
    34 mph
    5 mph
    Service Refill Capacities
    18 gal
    94 gal
    11 gal
    9.5 gal
    46.5 gal
    43.3 gal
    4.8 gal
    Standards
    ISO 3449 Level II 2005
    ISO 3471 2008
    ISO 3450 1996
    ISO 5010 2007
    Operating Weights
    30821 lb
    13140 lb
    12368 lb
    56328 lb
    1984 lb
    30005 lb
    30005 lb
    61994 lb
    32805 lb
    43144 lb
    42373 lb
    118322 lb
    Sound Levels
    76 dB(A)
    Body Capacities
    22.1 yd3
    17.7 yd3
    Body Plate Thickness
    0.24 in
    0.24 in
    0.35 in
    Ejector Cycle Times
    12 s
    15 s

  • Caterpillar 730 EJ (2018)

    Specifications
    Engine
    763 cu in
    5.1 in
    6.2 in
    The 730 EJ meets Tier 4 Final/Stage IV emission standards.
    367 hp
    375 hp
    Cat C13 ACERT
    370 hp
    The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage IV, Japan 2014 (Tier 4 Final), and Korea Tier 4 Final emission standards.
    The power ratings apply at rated speed of 1,800 rpm when tested under the conditions for the specified standard.
    The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
    Net power when the fan is at maximum speed is 274 kW (367 hp) per the SAE reference conditions.
    DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
    1579 lb ft
    1564 lb ft
    1200 rpm
    Cat C13 ACERT
    12500 ft in
    Transmission
    5 mph
    9 mph
    14 mph
    21 mph
    29 mph
    34 mph
    6 mph
    Steering
    4.75 seconds @ 60 rpm
    Weights
    60000 lb
    Service Refill Capacities
    21.9 gal
    108.8 gal
    5.3 gal
    10 gal
    12.4 gal
    29.1 gal
    33 gal
    6.3 gal
    Standards
    ISO 3449 Level II 2005
    ISO 3471 2008
    ISO 3450 2011
    ISO 5010 2007
    Operating Weights
    34723 lb
    12214 lb
    11707 lb
    58643 lb
    1433 lb
    29156 lb
    29156 lb
    59745 lb
    35009 lb
    41502 lb
    41017 lb
    117528 lb
    Sound Levels
    72 dB(A)
    The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed.
    Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
    Turning Circle
    Dimensions are for machines equipped with 750/65 R25 tires.
    294 in
    318 in
    152 in
    214 in
    Body Capacities
    22.1 yd3
    17.7 yd3
    Body Plate
    High strength Brinell HB450 wear resistant steel
    Optimal Loader/Truck Pass Matching
    An optimum system match gives you a major productivity advantage. The 730 EJ is an excellent match for the Cat 349F and 336F Hydraulic Excavators; and Cat 972M, 966M, 962M and 950M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.
    45
    56
    34
    4
    45
    5
    Eject/Retract Times
    12 s
    15 s